Legal 6 col x 19-1/2”
0702
Annual Drinking Water Quality Report 2019
Clay Municipal Water Works, P.O. Box 55, 956 Main Street, Clay, WV 25043
PWSID# 3300801
Clay-Roane Public Service District, P.O. Box 8, Procious, WV 25164
PWSID# 3300806
Clay County Public Service District, P.O. Box 130, Clay, WV 25043
PWSID# 3300809
PWSID# 3300810
PWSID# 3300811
April 9, 2020
Why Am I Receiving This Report?
In compliance with the Safe Drinking Water Act Amendments, the Town of Clay PSD, Clay County PSD is providing their customers with this annual water quality report. This report explains where your water comes from, what it contains, and how it compares to standards set by regulatory agencies. The information in this report shows the results of our monitoring for the period of January 1st to December 31st, 2019, or earlier if not on a yearly schedule.
If you have any questions concerning this report, you may contact Dreama Thomas at 304-587-4233, chief water plant operator for Clay Municipal Water Works, Monday through Friday between 8:00 a.m. and 4:00 p.m. If you have any further questions, comments or suggestions, please attend any of our regularly scheduled town council meetings held on the 1st Tuesday of every month at 5:00 p.m. at our office located at 2 Main Street in Clay, West Virginia.
If you have any questions concerning this report, you may contact General Manager Crystal Adkins at 304-548-5209 for those customers being served by Clay-Roane PSD, If you have any further questions, comments or suggestions, please attend any of our regularly scheduled board meetings held on the 3rd Thursday of every month at 6:30 p.m. at the Water Treatment Plant in Procious, West Virginia.
If you have any questions concerning this report, you may contact Beverly Pierson at 304-587-7579 for those customers being served by Clay County PSD, If you have any further questions, comments or suggestions, please attend any of our regularly scheduled board meetings held on the 2nd Tuesday of every month at 11:00 a.m. at the Clay County PSD office located on 247 Main Street in Clay, West Virginia.
Where does my water come from?
Your water source is surface water from the Elk River.
Clay County PSD purchases your drinking water from the Clay Municipal Water Works which uses surface water from the Elk River.
Source Water Assessment
A Source Water Assessment was conducted in 2003 by the West Virginia Bureau for Public Health (WVBPH). The intake that supplies drinking water to the town of Clay and the Clay-Roane PSD has a higher susceptibility to contamination, due to the sensitive nature of surface water supplies and the potential contaminant sources identified within the area. This does not mean that this intake will become contaminated; only that conditions are such that the surface water could be impacted by a potential contaminant source. Future contamination may be avoided by implementing protective measures. The source water assessment report which contains more information is available for review or a copy will be provided to you at our office during normal business hours or from the WVBPH 304-558-2981.
Why must water be treated?
All drinking water contains various amounts and kinds of contaminants. Federal and state regulations establish limits, controls, and treatment practices to minimize these contaminants and to reduce any subsequent health effects.
Contaminants in Water:
In order to ensure that tap water is safe to drink, the EPA prescribes regulations which limit the amount of certain contaminants in water provided by public water systems. FDA regulations establish limits of contaminants in bottled water which must provide the same protection tor public health.
Drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some contaminants. The presence of these contaminants does not necessarily indicate that water poses a health risk. More information about contaminants and potential health effects can be obtained by calling the Environmental Protection Agency’s Safe Drinking Water Hotline (1-800-426-4791).
The source of drinking water (both tap and bottled water) includes rivers, lakes, streams, ponds, reservoirs, springs, and wells. As water travels over the surface of land or through the ground, it dissolves naturally-occurring minerals, and, in some cases radioactive material and can pick up substances resulting from the presence of animals or from human activity.
Contaminants that may be present in source water include:
Microbial contaminants, such as viruses and bacteria, which may come from sewage treatment plants, septic systems, agricultural livestock operations and wildlife.
Inorganic contaminants, such as salts and metals, which can be naturally-occurring, or result from urban storm water runoff, industrial or domestic wastewater discharges, oil and gas production, mining, farming.
Pesticides and herbicides, which may come from a variety of sources such as agriculture, urban storm water runoff, and residential uses.
Organic chemical contaminants, including synthetic and volatile organic chemicals, which are by-products of industrial processes and petroleum production, and can, also, come from gas stations, urban storm water runoff, and septic systems.
Radioactive contaminants, which can be naturally-occurring or the result of oil and gas production and mining activities.
Some people may be more vulnerable to contaminants in drinking water than the general population. Immuno-compromised persons such as persons with cancer undergoing chemotherapy, persons who have undergone organ transplants, people with HIV/AIDS or other immune disorders, some elderly, and infants can be particularly at risk from infections. These people should seek advice about drinking water from their health care providers. EPA/CDC guidelines on appropriate means to lessen the risk of infection by Cryptosporidium and other microbial contaminants are available from the Safe Drinking Water Hotline (800-426-4791).
Water Quality Data Table
Definitions of terms and abbreviations used in the table or report:
• MCLG – Maximum Contaminant Level Goal, or the level of a contaminant in drinking water below which there is no known or expected risk to health. MCLGs allow for a margin of safety.
• MCL – Maximum Contaminant Level, or the highest level of a contaminant that is allowed in drinking water. MCLs are set as close to the MCLGs as feasible using the best available treatment technique.
• MRDLG – Maximum Residual Disinfectant Level Goal, or the level of drinking water disinfectant below which there is no known or expected risk to health. MRDLGs do not reflect benefits of use of disinfectants to control microbial contaminants.
• MRDL – Maximum Residual Disinfectant Level, or the highest level of disinfectant allowed in drinking water. There is convincing evidence that the addition of disinfectant is necessary to control microbial contaminants.
• AL- Action Level, or the concentration of a contaminant which, when exceeded, triggers treatment or other requirements which a water system must follow.
• TT – Treatment Technique, or a required process intended to reduce the level of a contaminant in drinking water.
Abbreviations that may be found in the table:
• ppm – parts per million or milligrams per liter
• ppb – parts per billion or micrograms per liter
• NTU – Nephelometric Turbidity Unit, used to measure cloudiness in water
• NE – not established
• N/A – not applicable
The Clay Municipal Water Works, Clay-Roane PSD and Clay County PSD routinely monitors for contaminants in your drinking water according to federal and state laws. The tables below show the results of our monitoring for contaminants.
Table of Test Results – Regulated Contaminants – Town of Clay Likely
Contaminant Violation Level Unit of MCLG MCL Source of
Y/N Detected Measure Contamination
Microbiological
Contaminants
Turbidity N 0.04 NTU 0 TT Soil runoff
100% of
monthly
samples
<0.3
Total Organic N 1.61 ppm NA TT Naturally present
Carbon in the environment
Inorganic
Contaminants
Barium N 0.0367 ppm 2 2 Discharge from drilling wastes;
Discharge from
metal refineries;
Erosion of
natural deposits
Nitrate N 0.05 ppm 10 10 Runoff from
fertilizer use;
Erosion of natural deposits
Volatile Organic
Contaminants
Chlorine N 1.25 ppm 4 4 Water additive used
Annual MRDLG MRDL to control
Avg. microbes
Range
0.30-2.5
Halo acetic acids N Annual ppb NA 60 By-product of
(HAA5) Avg. drinking water
Bird 44.9 disinfection
Range
Bird 19.3-79.2
Total trihalomethanes N Annual ppb NA 80 By-product of
(TTHMs) Avg. drinking water
Bird 38.5 chlorination
Range
Bird 16.3-53.1
Table of Test Results- Unregulated Contaminants
Violation Level Unit of MCLG MCL Likely Source of
Contaminant Y/N Detected Measure Contamination
Sodium N 5.41 ppm NE 20 Erosion of
natural deposits
Sulfate N 16.4 ppm 250 250 Erosion of
natural deposits
Violations
*For the reporting year 2019 we received a “Notice of Violation” letter from the WV Bureau for Public Health for maximum contamination level exceedance of samples for Total Haloacetic Acids (HAAS) (10/1/2018-12/31/2018), Public Notice Violation for (7/1/2028-9/30/2018). We have made every effort and taken every precaution to return to compliance.
Table of Test Results – Regulated Contaminants – Clay-Roane PSD – Procious
Violation Level Unit of MCLG MCL Likely Source of
Contaminant Y/N Detected Measure Contamination
Microbiological
Contaminants
Turbidity* Y 0.1 NTU 0 TT Soil runoff
100% of
monthly
samples
<0.3
Total Organic N 1.33 ppm NA TT Naturally present in
Carbon the environment
Inorganic
Contaminants
Barium N 0.324 ppm 2 2 Discharge of drilling waste; discharge from
metal refineries; erosion of natural deposits
Copper** N 0.254 ppm 1.3 AL Corrosion of house-
=1.3 hold plumbing
Lead** 4.9 ppb 0 AL Corrosion of house-
=15 hold plumbing
Nitrate N 0.35 ppm 10 10 Erosion of natural
deposits
Volatile Organic
Contaminants
Chlorine N 1.8 ppm 4 4 Water additive used to
Annual MRDLG MRDL control microbes
avg.
Range
1.4-2.2
Haloacetic Acids N Annual ppb NA 60 By-product of
(HAA5) Avg. drinking water
22.2 disinfection
Range
17.4-33.8
Total N Annual ppb NA 80 By-product of
Trihalomethanes Avg. drinking water
(TTHMs) 18.5 chlorination
Range
7.0-35.0
**Copper and lead samples were collected from 10 area residences on 8-29/9-28-17. Only the 90th percentile is reported. None of the samples exceeded the MCL.
Some people who drink water containing haloacetic acids in excess of the MCL over many years may have an increased risk of getting cancer.
Violations
*For the reporting year 2019 we received a “Notice of Violation” letter from the WV Bureau for Public Health for failing to monitor or complete on time the taking of sufficient samples for Total Arsenic (1/1/2018)-12/31/2018). For failing to monitor or complete on time the taking of sufficient samples for Inorganic Compounds (IOC’s) (1/1/2018-12/31/2018). For failing to monitor or complete on time the taking of sufficient samples for Trihalomethanes TTHM’s (7/1/2018-9/30/2018). For failing to monitor or complete on time the taking of sufficient samples for Haloacetic Acids (7/1/2018-9/30/2018). For Inadequate Disinfection Byproducts Precursor Removal Total Organic Carbons (1/1/2018-3/31/2019). For failing to monitor or complete on time the taking of sufficient samples for Ethylbenzene (8/1/2018-12/31/2018). For failure to monitor or complete on time the taking of sufficient samples for Toluene (1/1/2018-12/31/2018). For failure to monitor or complete on time the taking of sufficient samples for Denzene (1/1/2018-12/31/2018). For failure to monitor or complete on time the taking of sufficient samples for Chlorobenzene (1/1/2018-12/31/2018). For failure to monitor or complete on time the taking of sufficient samples for Tetrachloroethylene (1/1/2018-12/31/2018). For failure to monitor or complete on time the taking of sufficient samples for 1, 1, 2-Trichloroethane (1/1/2018-12/31-2018). For failure to monitor or complete on time the taking of sufficient samples for 1, 2-Dichloropropane (1/1/2018-12/31/2018). For failure to monitor or complete on time the taking of sufficient samples for Carbon Tetrachloride (1/1/2018-12/31/2018). For failure to monitor or complete on time the taking of sufficient samples for 1, 1, 1-Trichloroethane (1/1/2018-12/31/2018). For failure to monitor or complete on time the taking of sufficient samples for Trans-1, 2-Dichloroethylene (1/1/2018-12/31/2018). For failure to monitor or complete on time the taking of sufficient samples for 1, 1-Dichloroethylene (1/1/2018-12/31/2018). For failure to monitor or complete on time the taking of sufficient samples for Vinyl Chlorine (1/1/2018 to 12/31/2018). For failure to monitor or complete on time the taking of sufficient samples for Cis-1, 2-Dichloroethylene (1/1/2018 to 12/31/2018). For failure to monitor or complete on time the taking of sufficient samples for 1, 2, 4-Trichlorobenzene (1/1/2018 to 12/31/2018). For failure to monitor or complete on time the taking of sufficient samples for Styrene (1/1/2018 to 12/31/2018). For failure to monitor or complete on time the taking of sufficient samples for P-Dichlorobenzene (1/1/2018 to 12/31/2018). For failure to monitor or complete on time the taking of sufficient samples for O-Dichlorobenzene (1/1/2018 to 12/31/2018). For failure to monitor or complete on time the taking of sufficient samples for Dichloromethane (1/1/2018 to 12/31/2018). For failure to monitor or complete on time the taking of sufficient samples for Total Xylenes (7/1/2018 to 9/30/2018). For failure to monitor or complete on time the taking of sufficient samples for Total Xylenes (10/1/2018 to 12/31/2018). Public Notice Rule Linked to Violation (8/24/2018 to 5/30/2019). For failure to monitor or complete on time the taking of sufficient samples for Turbidity (8/1/2018 to 8/31/2018). For failure to monitor or complete on time the taking of sufficient samples for Turbidity (9/1/2018 to 9/30/2018). For failure to monitor or complete on time the taking of sufficient samples for E. Coli (8/1/2018 to 8/31/2018). We have made every effort and taken every precaution to return to compliance.
Table of Test Results- Unregulated Contaminants
Violation Level Unit of MCLG MCL Likely Source of
Contaminant Y/N Detected Measure Contamination
Nickel N 0.0021 ppb 100 100 Erosion of natural
deposits
Sodium N 11.0 ppm NE 20 Erosion of natural
deposits
Sulfate N 31.8 ppm 250 250 Erosion of natural
deposits
Table of Test Results – Regulated Contaminants – Clay County PSD – Ivydale, Triplett Ridge, Hartland
Violation Level Unit of MCLG MCL Likely Source of
Contaminant Y/N Detected Measure Contamination
Inorganic
Contaminants
Copper* N 0.025 ppm 1.3 AL= Corrosion of
Triplett 1.3 household plumbing
Votatile Organic
Contaminants
Chlorine N ppm 4 4 Water additive
Ivydale 0.67 MRDLG MRDL used to control
Triplett Ridge 0.78 microbes
Hartland 0.74
Annual
avg.
Range
Ivydale 0.23-1.94
Triplett Ridge 0.23-1.57
Hartland 0.25-1.81
Haloacetic acids N Annual ppb NA 60 By-product of
(HAA5) Avg. drinking water
Ivydale 47.8 disinfection
Triplett Ridge 30.6
Hartland 34.5
Range
Ivydale 27.1-72.7
Triplett Ridge 14.8-47.8
Hartland 18.3-48.2
Total trihalomethanes N Annual ppb NA 80 By-product
(TTHMs) Avg. of drinking water
Ivydale 64.2 chlorination
Triplett Ridge 44.9
Hartland 33.5
Range
Ivydale 22.2-101
Triplett Ridge 1704-84.2
Hartland 18.3-48.2
*Copper and lead samples were collected from 10 area residences on 8-9/9-19-17. Only the 90th percentile is reported. None of the samples exceeded the MCL.
Clay County PSD – Triplett.
Violations
*For the reporting year 2019 we received no “Notice of Violation” letters from the WV Bureau for Public Health.
Clay County PSD – Hartland.
Violations
*For the reporting year 2019 we received no “Notice of Violation” letter from the WV Bureau for Public Health.
Clay County PSD- Ivydale
Violations
*For the reporting year 2019 we received no “Notice of Violation” letter from the WV Bureau for Public Health.
Some people who drink water containing haloacetic acids in excess of the MCL over many years may have an increased risk of getting cancer.
Some people who drink water containing trihalomethanes in excess of the MCL over many years may experience problems with their liver, kidneys, or nervous system, and may have an increased risk of getting cancer.
WE ARE PLEASED TO REPORT THAT THE TOWN OF CLAY, CLAY ROANE PSD, CLAY COUNTY PSD IVYDALE, CLAY COUNTY PSD HARTLAND, AND CLAY COUNTY PSD TRIPLETT MET ALL FEDERAL AND STATE WATER STANDARDS FOR THE REPORTING YEAR 2019.
Additional Information:
Turbidity is the measure of cloudiness of the water. We monitor it because it is a good indicator of the effectiveness of our filtration system.
All other water test results for the reporting year 2019 were all non-detects.
If present, elevated levels of lead can cause serious health problems, especially for pregnant women and young children. Lead in drinking water is primarily from materials and components associated with service lines and home plumbing. The Town of Clay, Clay-Roane PSD, and Clay County PSD are responsible for providing high quality drinking water, but cannot control the variety of materials used in plumbing components. When your water has been sitting for several hours, you can minimize the potential for lead exposure by flushing your tap for 30 seconds to 2 minutes before using water for drinking or cooking. If you are concerned about lead in your drinking water, you may wish to have your water tested. Information on lead in drinking water, testing methods and steps you can take to minimize exposure is available from the Safe Drinking Water Hotline at 1-800-426-4791 or at http://www.epa.gov/safewater/lead at our offices during business hours.
This report will not be mailed. A copy will be made available for review or your use upon request.